I came up with this question right after I wanted to take apart a microwave to see why it wasn’t heating anything before I remembered that that’s a very, VERY bad idea
DO NOT backfeed your house’s electricity with a generator when your electricity gets shut down. You might electrocute someone working on those lines.
At least have it set up downstream of the main shit off and make sure that main is off before firing up the generator. There are devices available commercially that do that for you but they aren’t cheap and require professional installation.
I had a problem with the control panel in my Panasonic microwave and was able to fix it pretty easily. Everything I needed to get to was inside the right front of the microwave; the control pad membrane and the sticker that goes on the front of it.
Microwave
This is why we have specialized people who you call to handle these things.
Old CRT monitors. Particularly if they’ve been recently unplugged. There’s a cable in there my old teacher used to call “the superman cable”.
Ok firstly.
Never, work on anything that is still connected to a power supply.
This includes any stored energy. Isolate it first. Gravitational, electrical, pneumatic, hydraulic and chemical (if possible).
Don’t fuck with stored energy.
Secondly.
Learn how to test if things are live, or have any stored energy.
Thirdly.
Once you KNOW you are safe. Go hard, learn all you can.
You can harvest the transformers for a couple junk microwaves to make an arc welder.
If you aren’t experienced then pretty much all power supplies, battery backups, and motors should be left to someone else.
I saw someone lose a finger (later reattached) to a washing machine with a jammed tub. It was plugged in and on when they reached underneath it and yanked the belt, their sleeve ducked their hand into the drive wheel.
That said, if it fits your personality it can be both fun and satisfying to learn how to fix stuff. I try to teach anyone who’s interested and asks. Except LG washing machines, those things can fuck right off.
How did they reattach the finger to the washing machine?
super glue. Don’t get it on your eyelids, though.
Duct tape of course
Desktop computer power supplies. Don’t open them.
BS. Just drain capacitors. I’ve repaired a few (worthwhile ones) by replacing caps. You just need to know how. As with anything, read up.
How else am I supposed to put the magic smoke back in?
CRT TVs.
Anything with large capacitors?
Not a large capacitor in my case, but I took apart my old camera after it stopped working, and accidentally touched the capacitor for the flash. A memorable moment.
And people don’t realize how long they can hold power after the device has been “off”.
Edit - I forgot to add my thing! A good example of something that doesn’t sound scary is a TV, but it has large capacitors that can end you (or make a bad day).
Word for word my answer
- Laser / LED printers can blind you and may have larger capacitors.
- Old CRT style TVs / Monitors can get you if not discharged correctly.
Is it true they can hold on to a charge for decades? I was told that but it seemed unlikely.
The coating on the inside of the tube can behave like a Leyden jar caps can accumulate charge over time even without an obvious power source.
I’m treating them like guns. Assume they’re loaded until you prove otherwise.
That is my understanding. I remember hearing stories about dudes visiting a dump or whatever, kicking through the screen of a CRT and getting zapped like fuck
Unlikely. Even the best capacitors would discharge through leakage in 5 or 10 minutes.
why don’t you google that?
Do you ever find that sometimes when you intervene in to other people’s conversations to pull out some of your best absolute cracker lines like “why don’t you google that?” that people just don’t react properly at all? Like you’d expect an appropriate response like some light cheering and maybe lifting you up on their shoulders and handing you a medal and at least a couple of trophies. You know, something befitting of your incisive and insightful contributions, and instead they just kinda stop talking to you? That’s so weird huh?
Especially on a forum-style network dedicated to discussion 🙈
Don’t keep us hanging. Google it for us.
No I expect everyone not to be lazy fucks and do some basic research on one liner facts
The original question I see as a useful conversation where a simple search would probably not give as valuable resultes.
Where simple facts like “how long does a crt tube old a charge” is a Google thing.
Why don’t you Google why people don’t Google things instead of asking why they don’t Google it? It’s pretty hypocritical of you to ask that without putting in the research.
kids today don’t know about the scary suction cup on crts
Air conditioner. I melted a screwdriver.
This very much depends on your level of skill, experience and awareness of the dunning-kruger effect.
So basically, go for it?
This very much depends on your tolerance for ragrets.
[peels back t-shirt to display neck tattoo]
Since dunning-kruger isn’t valid, we’re halfway there!
If you’re gonna take a washing machine apart and you cut all the wires, make sure you cut the main electrical plug off as well or your dumbass son (me) will plug it in and electrocute himself with it.
and electrocute himself with it.
Um, aktschully, you shocked yourself. If you electrocuted yourself, you would be dead.
WAIT. UNLESS YOU DID DIE. DOES THAT MAKE YOU A GHOST?!!! A GHOST THAT CAN TYPE ON KEYBOARDS!!! AMAZING!!!
Yes, I am a ghost, I don’t type I just yell at it I till something happens, it’s exhausting.
You are doing it the hard way. You can shrink yourself down and enter the keyboard. By flying underneath the key membranes you can short out the contacts and make the keys trigger. So I’ve heard.
You poor thing… :(
It’s not all bad tho, fuckin with people is fun.
